Specific products

Male plug with piston contacts, quick locking




• Male plug, 7 pins Ø0.8 with piston of gilded brass to be soldered
• Isolators in thermo-plastic loaded with glass fiber
• Low dimensions : length (without pins) = 51 mm, Ømaxi = 18.5 mm
• Locking by a quarter of turn
• Usage temperature : -30°C up to +80°C

Wall go-through M23 with square support




• Reference : 442 910 006
• Male / female
• Fluoro-carbon isolators
• 6 contacts Ø2 mm (9, 12, 19 cts do refer to us)
• Locking by screwing
• Usage temperature : -30°C up to +70°C

M12 base 6 and 8 IC overmolded contacts




• M12 male base, 6 and 8 pins Ø0.8 IC output in gilded brass to be soldered
• Thermo-plastic isolators loaded with glass fiber
• Low dimensions : height (without pins) = 13 mm, Ømaxi = 16 mm
• Fixing system on wall per screw
• Water proofness : IP 67
• Locking by screwing
• Usage temperature : -30°C up to +100°C

Connector couple for lamp branch




• Male and female connectors, 2 contacts Ø2 in silver brass to be soldered
• Thermo-plastic isolators loaded by glass fiber
• Metallic body nickeled brass
• Specific fixation system so as to adapt to glass branches on their supports
• Locking by screwing or Push-Pull
• Usage temperature : -30°C up to +100°C

Cable assembly of M12 cords for current supply in immersion




• M12 male and female connectors, 5, 4 and 3 contacts Ø1 in gilded brass
• Thermo-plastic isolators loaded with glass fiber
• Overmolding of M12 plugs in TPU
• Metallic body in nickeled brass
• Water proofness : IP 68
• Locking by screwing
• Usage temperature : -20°C up to +70°C

Push-Pull connector 2cts with low dimensions - high temperature




• Male and female connectors, 2 contacts Ø1 in gilded brass to be crimped (or to be soldered)
• Thermo-plastic isolators loaded with glass fiber
• Resistant to vibrations and high accelerations / decelerations
• Metallic body in anodized aluminum
• Low dimensions (external Ø maxi : connection 12 mm, locking 18.5 mm)
• Locking Push-Pull
• Usage temperature : -10°C up to +200°C

Miscellaneous cable assembly and overmolded cords (M18, electro valves ...)




• Cabling and overmolding of cords with different active parts (connectics) :
     › M18 connectors, 4 contacts
     › Connectors for electro-valve (3 and 4 contacts)
     › Connector with bornier

• Overmolding in TPU (UL 94V0 or not)
• Dimensions Suited to your wishes
• Water proofness IP 67
• Straight and angled version is possible

Y M12 shielding at 360°




• Overmolded cords of type M12, male and female (5,4 and 3 contacts Ø1 in gilded brass)
• Continuity of the shielding 360°
• Thermo-plastic isolators PA loaded with glass fiber
• Overmolding of M12 plugs in TPU
• Usage temperature : -40°C up to +100°C
• Nut and junction of shielding in nickel-plated brass
• Dimensions fitting the M12
• Water proofness IP 67
• Straight and angled version (plugs M12)
• Locking by screwing
• Usage temperature : -30°C up to +70°C

Connector 25 blended contacts




• 25 blended contacts in gilded brass : 4 Ø2 for the power and 21 Ø1 for the signals
• Unmountable contacts to be crimped (or to be soldered)
• Continuity of the junction of shielding between the plug and the connected bases : double separated shielding for the signals and the power
• Isolation distance is respected for the high power contacts (690V)
• Scoop-proof
• Low dimensions : (Ømaxi : 44 mm)
• Water proofness IP 65
• Cable clamp with double output (Ø10,5 et 12,8)
• Straight output and 90° angled output
• Locking by 1/6 turn
• Usage temperature : -30°C up to +100°C

M23 cords with 12 blended contacts




• Overmolded cords of type M23 with 12 blended contact in gilded brass : 4 Ø3 for the power and 8 Ø1 for the signals
• Isolators in lax silicone
• Overmolding in TPU
• Canon and nut in anodized uncolored aluminium so as to sustain salt spray during 200h at minimum.
• Dimensions fitting M23 whith hexagonal nut for lock : (Ø maxi : 29 mm)
• Water proofness IP 67
• Straight and angled version
• Locking by screwing
• Usage temperature : -40°C up to +80°C

Download the fascicle